紅外遙控器干擾電路

紅外遙控器干擾電路 IR Remote Control Jammer

By Carl
Don't like your little brother's TV channel selection? Hate the volume your wife sets the stereo at? Want to just annoy someone? This circuit does all that and more by jamming most IR remote signals. The circuit releases a flood of pulsing IR light that confuses the reciever by corrupting the data stream.

Schematic

Part
 Total Qty.
 Description
 Substitutions
 
R1
 1
 100K 1/4W Resistor
 
 
R2
 1
 150K 1/4W Resistor
 
 
R3
 1
 10K 1/4W Resistor
 
 
R4
 1
 1K 1/4W Resistor
 
 
R5
 1
 See "Notes"
 
 
C1
 1
 10nF Ceramic Disc Capacitor
 
 
C2
 1
 1uF Electrolytic Capacitor
 
 
D1, D2, D3
 3
 High Output IR LED
 
 
Q1
 1
 2N4403 PNP Transistor
 
 
Q2
 1
 2N4401 NPN Transistor
 
 
S1
 1
 Normally Open Momentary Push Botton
 
 
B1
 1
 4.5V Battery (Three "AA"'s In Series)
 
 
MISC
 1
 Wire, Case, Board
 

Notes:
1. Email Carl with questions, comments, etc.

2. You may need to adjust the value of R3 for the right frequency. A pot can be used.

3. You may only need one IR LED.

4. It goes without saying that this circuit should be used with descretion.