Microchip公司的PIC32MZ EF系列是高達250MHz的集成浮點單元(FPU),具有廣泛的外設和包括局域網(CAN)的極好的連接選擇,工作電壓2.1V到 3.6V,DSP增強核具有四
An interrupt is an internal or external event that requires quick attention from the controller. The PIC32MZ architecture provides a rich interrupt system that can manage up to 190 sources of inte
In my last post I implement "Key Debounce" with port polling, port polling is not very efficient. And this time, I will use change notification instead of port polling. It generates interrupt and
In my older blog "PIC32MZ tutorial -- Key Debounce", I shows how to acheive key debounce with port polling. At this moment, I write an application which uses External Interrupt. Therefore, only ge
經過千辛萬苦,今天終于完工PIC32MZ EC Starter Kit的ethernet bootloader項目。我將整個項目, 命名為PhnBootloader。它分為兩個部分。第一個部分是PC 端的host程序PhnLoader_v3.0。另一部分是單片機端boot程序PhnBo
At this moment, I accomplish the interface of UART communication for PIC32MZ EC Starter Kit. This interface configures the PIC32MZ for communication with a host PC at 115200 baud. There are five f
Core Timer is a very popular feature of PIC32 since it isa piece of the MIPS M4K core itself and is common to all MIPS processors. Most RTOS's timer are based on core timer. This timer has a f
The microcontroller is PIC32MZ2048ECH144 on the PIC32MZ EC Starter Kit. This microcontroller has four 32-bit synchronous timers are available by combining Timer2 with Timer3, Timer4 with Timer5, T
趁熱打鐵,在上一PIC32MZ UDP ethernet bootloader的基礎上我又完成了采用TCP協議的PIC32MZ ethernet bootloader。兩款ethernet bootloader基本架構都一樣,數據包格式也一樣。TCP ethernet bootloader 也分兩部
Today I accomplish a simple application for PIC32MZ EC Starter Kit. This application uses Input Capture feature of PIC32MZ. The Input Capture module captures the 32-bit value of the selected Time
Today I implement "Hello World" on PIC32MZ EC starter kit. The application of "Hello World" only lights up a LED. There are three LEDs on the starter kit board -- LED1 and LED2 and LED3. At the mo
Today I accomplish a application on PIC32MZ EC Starter Kit. The feature of application is to light up LED when key released and put out LED when key pressed. LED is the Starter Kit LED1 connecting
Output Compare is a powerful feature of embedded world. The PIC32 Output Compare module compares the values stored in the OCxR and/or the OCxRS registers to the value in the selected timer. When a
Today I finish the "Blinky LED" application on PIC32MZ starter kit. This application let LED1 blink with 0.5HZ frequency. The pseudo code is like LOOP: LED ON Delay 1 second LED OFF D
In my previous blog "PIC32MZ tutorial -- Output Compare", I shows how to apply Output Compare without interrupt to generate PWM signal. I also tried the Output Compare interrupt. I selected OC to
Watchdog is a very necessary module for embedded system. Someone said that embedded system operates without watchdog enabled just like the car without air bag. You should always enabled watchdog a
目前大部分電子產品在用戶體驗升級方面通常從交互方式入手,而通常的思路就是將傳統按鍵交互來使用GUI來替代。工程師面臨著一個設計難題:MCU在圖形處理方面相比SoC有著很大的短板,而在某些計算和圖形處理方面不是很
大聯大控股宣布,其旗下品佳推出基于美國微芯科技公司(Microchip)的PIC32MZ系列MCU的VR應用解決方案。
PIC32MZ EF系列是Microchip首個符合汽車電子委員會制定的AEC-Q100一級(-40至125°C)規范的PIC32 MCU產品系列
回合解決方案已經推出了物聯網的無線上網乒乓球其(IOT)邊緣節點,靈活而強大的硬件平臺,將現場設備連接到云。支持小尺寸主板具有強大的Microchip的PIC32MZ 32位MCU和一個高速蜂窩泰利特(Telit)模塊的RTOS是基于模塊