單片機DA轉換實現正弦波

使用的是查表法：

1.c文件：

#include "reg52.h"

#include

#include

#define PCF8591 0x90

#define uint unsigned int

#define uchar unsigned char

#define arr_length 720 //正弦波數組長度

code unsigned char sin1[720]={0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x8a,0x8b,0x8c,0x8d,0x8e,

0x8f,0x90,0x91,0x92,0x94,0x95,0x96,0x97,0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0xa0,0xa1,0xa2,0xa3,0xa4,

0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,0xb8,0xb9,

0xba,0xbb,0xbc,0xbd,0xbe,0xbf,0xbf,0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,

0xcd,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd3,0xd4,0xd5,0xd6,0xd7,0xd8,0xd8,0xd9,0xda,0xdb,0xdc,0xdc,

0xdd,0xde,0xdf,0xdf,0xe0,0xe1,0xe2,0xe2,0xe3,0xe4,0xe4,0xe5,0xe6,0xe6,0xe7,0xe8,0xe8,0xe9,0xea,0xea,

0xeb,0xeb,0xec,0xed,0xed,0xee,0xee,0xef,0xef,0xf0,0xf1,0xf1,0xf2,0xf2,0xf3,0xf3,0xf4,0xf4,0xf4,0xf5,

0xf5,0xf6,0xf6,0xf7,0xf7,0xf7,0xf8,0xf8,0xf9,0xf9,0xf9,0xfa,0xfa,0xfa,0xfb,0xfb,0xfb,0xfb,0xfc,0xfc,

0xfc,0xfc,0xfd,0xfd,0xfd,0xfd,0xfe,0xfe,0xfe,0xfe,0xfe,0xfe,0xff,0xff,0xff,0xff,0xff,0xff,0xff,

0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,

0xff,0xff,0xff,0xfe,0xfe,0xfe,0xfe,0xfe,0xfe,0xfd,0xfd,0xfd,0xfd,0xfc,0xfc,0xfc,0xfc,0xfb,0xfb,

0xfb,0xfb,0xfa,0xfa,0xfa,0xf9,0xf9,0xf9,0xf8,0xf8,0xf7,0xf7,0xf7,0xf6,0xf6,0xf5,0xf5,0xf4,0xf4,

0xf4,0xf3,0xf3,0xf2,0xf2,0xf1,0xf1,0xf0,0xef,0xef,0xee,0xee,0xed,0xed,0xec,0xeb,0xeb,0xea,0xea,

0xe9,0xe8,0xe8,0xe7,0xe6,0xe6,0xe5,0xe4,0xe4,0xe3,0xe2,0xe2,0xe1,0xe0,0xdf,0xdf,0xde,0xdd,0xdc,

0xdc,0xdb,0xda,0xd9,0xd8,0xd8,0xd7,0xd6,0xd5,0xd4,0xd3,0xd3,0xd2,0xd1,0xd0,0xcf,0xce,0xcd,0xcd,

0xcc,0xcb,0xca,0xc9,0xc8,0xc7,0xc6,0xc5,0xc4,0xc3,0xc2,0xc1,0xc0,0xc0,0xbf,0xbe,0xbd,0xbc,0xbb,

0xba,0xb9,0xb8,0xb7,0xb6,0xb5,0xb4,0xb3,0xb2,0xb0,0xaf,0xae,0xad,0xac,0xab,0xaa,0xa9,0xa8,0xa7,

0xa6,0xa5,0xa4,0xa3,0xa2,0xa1,0xa0,0x9e,0x9d,0x9c,0x9b,0x9a,0x99,0x98,0x97,0x96,0x95,0x94,0x92,

0x91,0x90,0x8f,0x8e,0x8d,0x8c,0x8b,0x8a,0x88,0x87,0x86,0x85,0x84,0x83,0x82,0x81,0x80,0x7e,0x7d,

0x7c,0x7b,0x7a,0x79,0x78,0x77,0x75,0x74,0x73,0x72,0x71,0x70,0x6f,0x6e,0x6d,0x6b,0x6a,0x69,0x68,

0x67,0x66,0x65,0x64,0x63,0x62,0x61,0x5f,0x5e,0x5d,0x5c,0x5b,0x5a,0x59,0x58,0x57,0x56,0x55,0x54,

0x53,0x52,0x51,0x50,0x4f,0x4d,0x4c,0x4b,0x4a,0x49,0x48,0x47,0x46,0x45,0x44,0x43,0x42,0x41,0x40,

0x40,0x3f,0x3e,0x3d,0x3c,0x3b,0x3a,0x39,0x38,0x37,0x36,0x35,0x34,0x33,0x32,0x32,0x31,0x30,0x2f,

0x2e,0x2d,0x2c,0x2c,0x2b,0x2a,0x29,0x28,0x27,0x27,0x26,0x25,0x24,0x23,0x23,0x22,0x21,0x20,0x20,

0x1f,0x1e,0x1d,0x1d,0x1c,0x1b,0x1b,0x1a,0x19,0x19,0x18,0x17,0x17,0x16,0x15,0x15,0x14,0x14,0x13,

0x12,0x12,0x11,0x11,0x10,0x10,0xf,0xe,0xe,0xd,0xd,0xc,0xc,0xb,0xb,0xb,0xa,0xa,0x9,0x9,0x8,0x8,

0x8,0x7,0x7,0x6,0x6,0x6,0x5,0x5,0x5,0x4,0x4,0x4,0x4,0x3,0x3,0x3,0x3,0x2,0x2,0x2,0x2,0x1,0x1,0x1,

0x1,0x1,0x1,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,

0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x1,0x1,0x1,0x1,0x1,0x1,0x2,0x2,0x2,0x2,0x3,0x3,0x3,0x3,0x4,0x4,

0x4,0x4,0x5,0x5,0x5,0x6,0x6,0x6,0x7,0x7,0x8,0x8,0x8,0x9,0x9,0xa,0xa,0xb,0xb,0xb,0xc,0xc,0xd,0xd,

0xe,0xe,0xf,0x10,0x10,0x11,0x11,0x12,0x12,0x13,0x14,0x14,0x15,0x15,0x16,0x17,0x17,0x18,0x19,0x19,

0x1a,0x1b,0x1b,0x1c,0x1d,0x1d,0x1e,0x1f,0x20,0x20,0x21,0x22,0x23,0x23,0x24,0x25,0x26,0x27,0x27,

0x28,0x29,0x2a,0x2b,0x2c,0x2c,0x2d,0x2e,0x2f,0x30,0x31,0x32,0x32,0x33,0x34,0x35,0x36,0x37,0x38,

0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f,0x3f,0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,

0x4b,0x4c,0x4d,0x4f,0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57,0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,

0x5f,0x61,0x62,0x63,0x64,0x65,0x66,0x67,0x68,0x69,0x6a,0x6b,0x6d,0x6e,0x6f,0x70,0x71,0x72,0x73,

0x74,0x75,0x77,0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e};

uchar code sin2[256]={

0x80, 0x83, 0x86, 0x89, 0x8c, 0x8f, 0x92, 0x95,

0x98, 0x9c, 0x9f, 0xa2, 0xa5, 0xa8, 0xab, 0xae,

0xb0, 0xb3, 0xb6, 0xb9, 0xbc, 0xbf, 0xc1, 0xc4,

0xc7, 0xc9, 0xcc, 0xce, 0xd1, 0xd3, 0xd5, 0xd8,

0xda, 0xdc, 0xde, 0xe0, 0xe2, 0xe4, 0xe6, 0xe8,

0xea, 0xec, 0xed, 0xef, 0xf0, 0xf2, 0xf3, 0xf4,

0xf6, 0xf7, 0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfc,

0xfd, 0xfe, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff,

0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfe,

0xfd, 0xfc, 0xfc, 0xfb, 0xfa, 0xf9, 0xf8, 0xf7,

0xf6, 0xf5, 0xf3, 0xf2, 0xf0, 0xef, 0xed, 0xec,

0xea, 0xe8, 0xe6, 0xe4, 0xe3, 0xe1, 0xde, 0xdc,

0xda, 0xd8, 0xd6, 0xd3, 0xd1, 0xce, 0xcc, 0xc9,

0xc7, 0xc4, 0xc1, 0xbf, 0xbc, 0xb9, 0xb6, 0xb4,

0xb1, 0xae, 0xab, 0xa8, 0xa5, 0xa2, 0x9f, 0x9c,

0x99, 0x96, 0x92, 0x8f, 0x8c, 0x89, 0x86, 0x83,

0x80, 0x7d, 0x79, 0x76, 0x73, 0x70, 0x6d, 0x6a,

0x67, 0x64, 0x61, 0x5e, 0x5b, 0x58, 0x55, 0x52,

0x4f, 0x4c, 0x49, 0x46, 0x43, 0x41, 0x3e, 0x3b,

0x39, 0x36, 0x33, 0x31, 0x2e, 0x2c, 0x2a, 0x27,

0x25, 0x23, 0x21, 0x1f, 0x1d, 0x1b, 0x19, 0x17,

0x15, 0x14, 0x12, 0x10, 0x0f, 0x0d, 0x0c, 0x0b,

0x09, 0x08, 0x07, 0x06, 0x05, 0x04, 0x03, 0x03,

0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,

0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,

0x02, 0x03, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,

0x09, 0x0a, 0x0c, 0x0d, 0x0e, 0x10, 0x12, 0x13,

0x15, 0x17, 0x18, 0x1a, 0x1c, 0x1e, 0x20, 0x23,

0x25, 0x27, 0x29, 0x2c, 0x2e, 0x30, 0x33, 0x35,

0x38, 0x3b, 0x3d, 0x40, 0x43, 0x46, 0x48, 0x4b,

0x4e, 0x51, 0x54, 0x57, 0x5a, 0x5d, 0x60, 0x63,

0x66, 0x69, 0x6c, 0x6f, 0x73, 0x76, 0x79, 0x7c, };

sbit key1=P3^4;

sbit key2=P3^5;

uint speed=20; //正弦波變化速度

uint num=0;

uint time=0;

DACconversion(unsigned char sla,unsigned char c, unsigned char Val);

void Init_Timer1(void)//定時器一初始化程序

{

TMOD=0x01;

TH0=(65535-0)/256;

TL0=(65535-0)%256;

EA=1;//開總中斷

ET0=1;//開定時器0中斷

TR0=1; //啟動定時器0

}

void delay(uchar s){

uchar i,j;

for(i=s;i>0;i--)

for(j=110;j>0;j--);

}

void change_Speed(){

if(key1==0){

delay(10);

if(key1==0){

speed++;

}

}

if(key2==0){

delay(10);

if(key2==0){

if(speed>1)

speed--;

}

}

}

void time0() interrupt 1{

TH0=(65535-0)/256;

TL0=(65535-0)%256;

change_Speed();

for(num=0;num

DACconversion(PCF8591,0x40,sin1[num]);

}

if(num==arr_length){

num=0;

}

}

void main()

{

Init_Timer1();

}

　　i2c.c文件

/*-----------------------------------------------

名稱：IIC協議

修改：無

內容：函數是采用軟件延時的方法產生SCL脈沖,固對高晶振頻率要作 一定的修改....(本例是1us機器

周期,即晶振頻率要小于12MHZ)

------------------------------------------------*/

#include "i2c.h"

//#include "delay.h"

#define PCF8591 0x90

#define _Nop() _nop_() //定義空指令

bit ack; //應答標志位

sbit SDA=P2^0;

sbit SCL=P2^1;

/*------------------------------------------------

啟動總線

------------------------------------------------*/

void Start_I2c()

{

SDA=1; //發送起始條件的數據信號

_Nop();

SCL=1;

_Nop(); //起始條件建立時間大于4.7us,延時

_Nop();

_Nop();

_Nop();

_Nop();

SDA=0; //發送起始信號

_Nop(); //起始條件鎖定時間大于4μ

_Nop();

_Nop();

_Nop();

_Nop();

SCL=0; //鉗住I2C總線，準備發送或接收數據

_Nop();

_Nop();

}

/*------------------------------------------------

結束總線

------------------------------------------------*/

void Stop_I2c()

{

SDA=0; //發送結束條件的數據信號

_Nop(); //發送結束條件的時鐘信號

SCL=1; //結束條件建立時間大于4μ

_Nop();

_Nop();

_Nop();

_Nop();

_Nop();

SDA=1; //發送I2C總線結束信號

_Nop();

_Nop();

_Nop();

_Nop();

}

/*----------------------------------------------------------------

字節數據傳送函數

函數原型: void SendByte(unsigned char c);

功能: 將數據c發送出去,可以是地址,也可以是數據,發完后等待應答,并對

此狀態位進行操作.(不應答或