基于MAX16834設計的112W升壓LED驅動器技術

MAX16834 是電流模式高亮LED(HBLED)驅動器,可用于升壓,升壓-降壓,SEPIC和高邊降壓拓?fù)? 工作電壓4.75V 到 28V,3000:1 PWM調光/模擬調光,可編頻率從100kHz到1MHz,主要用在單串LED LCD背光,汽車前后照明,投映系統RGB LED光源,點和環境照明以及DC/DC升壓/升-降壓轉換器.本文介紹了MAX16834主要特性,方框圖,多種應用電路以及112W升壓LED驅動器參考設計,電路圖和材料清單(BOM).

圖1.MAX16834內部方框圖

圖2.MAX16834升壓LED驅動器

圖3.MAX16834升壓-降壓LED驅動器(VLED+ < 28V)

圖4.MAX16834帶汽車負載突變保護的升壓LED驅動器

圖5.MAX16834高邊降壓LED驅動器[!--empirenews.page--]

圖6.MAX16834升壓DC/DC轉換器

圖7.MAX16834升壓-降壓DC/DC轉換器

全陶瓷電容的112W升壓長串LED驅動器參考設計

112W boost driver for long strings of LEDs using all ceramic capacitors

This is a reference design for a 112.5W boost LED driver that uses the MAX16834 for long strings of LEDs. These long LED strings are commonly found in streetlights and parking garage lights.

Input voltage: 24VDC ±5% (at 1.49A)

VLED configuration: Two parallel strings. Each string consists of 19 WLEDs and a 5Ω resistor for current balancing. Current is 750mA per sting for a total of 1.5A into 75V.

Dimming: 50μs (min) on-pulse for up to a 200:1 dimming ratio with a 100Hz dimming frequency

圖8.112W升壓長串LED驅動器參考設計外形圖

圖9.112W升壓長串LED驅動器參考設計電路圖

112W升壓長串LED驅動器參考設計材料清單(BOM):